Product Details
Leak proof, sealless magnetic drives and designed for in-line, non-submersible use
Pumping heads are easily rotated, cleaned or serviced with no special tools required
Spindle shaft is supported at both ends to prevent impeller damage during start-up and stop of pump
Thermally protected, open, shaded-pole motor (DA356) - fan cooled motor (DA346, DA349)
Sleeve bearings (DA356, DA346), ball bearing (DA349)
3' lead wires without plug (DA356), 6' power cord with 3-prong plug (DA346, DA349)
Specific gravity to 1.1
Fluid temperature to 150°F, ambient air temperature to 77°F
115 V, 60 Hertz
UR/C-CSA listing; ; Construction:; Volute: Glass-filled polypropylene; Housing: Glass-filled polypropylene; Impeller: Glass-filled polypropylene and ceramagnet "A" (barium ferrite); Shaft: Stainless steel (DA346), titanium (DA356, DA349); Thrust washers: Rulon "J" (Teflon®) (DA346), titanium (DA356, DA349); O-ring: Nitrile
Specifications
- Intake Size 1/2"
- Discharge Port Size 6"
- Motor 1.2 HP
Additional Specifications
- Amps 1.4
- Watts 105
- Performance (GPM@Head) 1' 9.8
- Performance (GPM@Head) 3' 9.1
- Performance (GPM@Head) 6' 8.2
- Performance (GPM@Head) 9' 6.5
- Performance (GPM@Head) 15' 2.5
- Shut off Feet 16.1
- Shut off PSI 7
- Wt. lbs. 7.5