Product Details
Features a variable range to allow any intermediate voltage from 10 V to 1000 V in 1 V steps, when testing specific test voltages that do not appear in the standard ranges is required
Functions such as PI (Polarisation Index) and DAR (Dielectric Absorption Ratio), capacitance measurement and a greater range of test voltages increase the suitability for many applications
Designed for electrical and industrial testing
Stabilised insulation test voltage
Test result storage of up to 1000 test results
Live circuit detection and protection
Over-moulded for increased protection
IP54 weatherproof rating
Battery life of approximately 3000 insulation tests with duty cycle of 5 sec ON /55 sec OFF @ 1000 V into 1 MΩ
60 second countdown timer
Default set up to single polarity, configurable to dual polarity
Meets Category IV 600V standards
Included: (1) Insulation tester, (1) SP5 Remote switch probe, (1) Set of red/black silicone test leads with probes & clips, (1) Hard carrying case, (6) AA Alkaline batteries, (1) Information CD
Specifications
- Display Type Analogue/Digital
Additional Specifications
- Nominal Test Voltages 50 V, 100 V, 250 V, 500 V, 1000 V
- Insulation Accuracy 50 Volts (10 GΩ ± 2% ± 2 digits ± 4.0% per GΩ), 100 Volts (20 GΩ ± 2% ± 2 digits ± 2.0% per GΩ), 250 Volts (50 GΩ ± 2% ± 2 digits ± 0.8% per GΩ), 500 Volts (100 GΩ ± 2% ± 2 digits ± 0.4% per GΩ), 1000 Volts (200 GΩ ± 2% ± 2 digits ± 0.2% per GΩ)
- Continuity Measurement 0.01 Ω - 999 kΩ (0 - 1000 kΩ on Analogue Scale)
- Voltage Range (AC) 10 mV - 600 V TRMS sinusoidal (15 - 400 Hz)
- Voltage Range (DC) 0 - 600 V
- Volt Range Accuracy AC ( ±2% ±1 digit ) & DC ( ±2% ±2 digit )
- Capacitance Range 1 nF - 10 μF
- Capacitance Accuracy ± 5.0% ± 2 digits (0.1 nF - 1 nF unspecified)
- Operating Temperature Range -10 - 55 °C